1200 Litre Pillar Water Butt with Small Footprint For Rainwater Harvesting

The 1200 litre rainwater harvesting water butt with a slim flat walls is designed for space saving. Each rainwater harvesting water butt is designed and manufactured in Britain.

Optional extras include brass tap, plastic shut off valve, rainwater diverter, side connector kits etc.

Available in a wide range of colours, Millstone, Sandstone, Black, White Marble, Green and Green Marble. The 1200 Litre is manufactured from frost resistant MDPE and comes with a 14" lid.

It comes with two 1" brass outlet pre-moulded into the water butt on the bottom right hand side and a 2" brass threaded outlet on the bottom left hand side allowing you to use 100% of the water stored, and 1 X 3/4" raised on the front ideal for a watering can.

Frost proof in winter; plastic will not crack, Slim square design - ideal when space is limited, designed to expand and contract during hot and cold weather so that it does not split when it freezes, if it is sited to close to a wall it will be forced forward. Robust, heavy duty product; industrial strength, Opaque plastic reduces algae growth in sunlight. Rotationally moulded for strength & durability, 2 year warranty against manufacturing defects

Specification:

• Height : 1500mm
• Length: 1200mm
• Width: 670mm
• Weight: 60kg
• Capacity: 1200 Litres
• 1 x 3/4" BSP Brass Thread approx. 30cm from Bottom for Watering Can Use
• 1 x 1" BSP Threaded Port Near Base For Draining Down or Joining
• 1 x 2" BSP Threaded Port Near Base For Draining Down or Joining

Optional Extras

• Side Connection Kit (1" and/or 2") - 2x 1" or 2" BSP Male threaded compression adaptors and 2m of pipe
  
• Hose Connection Kit (1" and/or 2" for low outlet) - Steel shut off valve, Brass hose connector, 2 x Straight connectors, Reducer, Roll of PTFE tap
• Downpipe Diverter - Suitable for 68mm Round and 65mm Square Downpipes
• Brass Tap Kit (for raised outlet) - Brass tap, Brass reducing nut, Roll of PTFE tap