800 Litre Pillar Water Butt with Small Footprint For Rainwater Harvesting

The 800 litre rainwater harvesting water butt with a slim flat walls is designed for space saving. Each rainwater harvesting water butt is designed and manufactured in Britain.

Optional extras include brass tap, plastic shut off valve, rainwater diverter, side connector kits etc.

Available in a wide range of colours, Millstone, Sandstone, Black, White Marble Green and Green Marble. The 800 Litre is manufactured from frost resistant MDPE and comes with a 9" access lid. 

It comes with two 1" brass outlets pre-moulded into the water butt one on each side allowing you to use 100% of the water stored, and 1 X 3/4" raised on the front ideal for a watering can.

Frost proof in winter; plastic will not crack, Slim square design - ideal when space is limited, designed to expand and contract during hot and cold weather so that it does not split when it freezes, if it is sited to close to a wall it will be forced forward. Robust, heavy duty product; industrial strength, Opaque plastic reduces algae growth in sunlight. Rotationally moulded for strength & durability, 2 year warranty against manufacturing defects

Specification:

• Height : 1800mm
• Length: 825mm
• Width: 630mm
• Weight: 45kg
• Capacity: 800 Litres
• 1 x 3/4" BSP Brass Thread approx. 30cm from Bottom for Watering Can Use
• 2 x 1" BSP Threaded Ports Near Base For Draining Down or Joining

Optional Extras

• Side Connection Kit - 2x 1" BSP Male threaded compression adaptors and 2m of pipe
  
• Hose Connection Kit (for low outlet) - Steel shut off valve, Brass hose connector, 2 x Straight connectors, Reducer, Roll of PTFE tap
• Downpipe Diverter - Suitable for 68mm Round and 65mm Square Downpipes
• Brass Tap Kit (for raised outlet) - Brass tap, Brass reducing nut, Roll of PTFE tap